The Top of Sauer Danfoss's PV Range — Mining Dump Truck Class
At 400 bar and 250cc/rev, the PV90R250 is genuinely the largest, highest-pressure pump in Sauer Danfoss's PV lineup covered on this site — reserved for large mining dump trucks where hoist demand far exceeds anything a standard commercial tipper requires. This is a specialised, higher-value part given the scale of equipment it serves.
Large mining dump trucks operate at a genuinely different scale from standard commercial tippers — hauling far greater loads means the hoist hydraulics need proportionally more power. The PV90R250's 400 bar rating and 250cc/rev displacement, roughly 10x the displacement of the entry-level PV22, reflects this. Given the value and specialised nature of this part, we're especially thorough with sourcing verification and documentation.
| Spec | Value |
|---|---|
| Application | Mining dump truck |
| Max Operating Pressure | 400 bar |
| Displacement | 250 cc/rev |
| Position in PV Range | Largest / highest pressure |
Confirm your exact truck make and model before ordering — WhatsApp your machine details for a precise match.
Measured against Sauer Danfoss tolerance and replaced where wear exceeds spec.
Tested for accurate, responsive output across the pump's full range.
Replaced as standard on every unit.
Verified at 400 bar rated pressure, output documented on the written test report.
A grounded mining dump truck in an active operation costs real production time — we prioritise fast dispatch.
Given the lower-volume, higher-value nature of this part, WhatsApp us for an honest current timeline before committing.
Written test report with actual pressure and flow readings.
Replacement, not repair, if a workmanship defect appears within warranty.