Runs the Same Pump Family as the PC350-8 Excavator
The D85EX-15/18 bulldozer runs a Komatsu HPV145 pump — the same base pump family used on the PC350-8 excavator, reflecting Komatsu's weight-class-driven engineering approach across its HPV series. At 23-26 tonnes, the D85EX is a genuine step up from the D65EX, matching the larger displacement and higher flow demands of this heavier equipment class.
The D85EX sits a genuine step above the D65EX in Komatsu's dozer range, and its HPV145 pump reflects that — the same base architecture used on the PC350-8 excavator, scaled to this 23-26 tonne machine class. For mining and heavy construction operators running mixed Komatsu fleets, this cross-model commonality is worth knowing when planning parts sourcing across excavators and dozers of comparable weight class.
| Spec | Value |
|---|---|
| Pump Model | HPV145 |
| Applicable Models | D85EX-15/18 |
| Max Operating Pressure | 350 bar |
| Displacement | 145 cc/rev |
| Machine Weight Class | 23-26 tonnes |
| Shared With | Komatsu PC350-8 excavator |
Confirm your exact generation and pump nameplate before ordering — WhatsApp a photo for a precise match.
Measured against Komatsu's original HPV145 tolerance specification.
Tested for reliable, tandem-circuit performance under heavy dozing load.
Replaced as standard on every unit.
Verified at 350 bar rated pressure, output documented on the written test report.
A grounded D85EX in an active mining or quarry operation costs real production time.
Running both D85EX dozers and PC350-8 excavators? We can help consolidate your pump sourcing.
Written test report with actual pressure and flow readings.
Replacement, not repair, if a workmanship defect appears within warranty.