Pan India Supply  |  Export to Saudi Arabia, Nepal, UAE

Komatsu Makes Its Own Forklifts — And Its Own Pump

Refurbished Komatsu Forklift Hydraulic Pumps

Unlike the excavator and backhoe loader lines, Komatsu genuinely builds its own forklift hydraulics in-house — the FG20 to FG25 range runs on the 37B-1KA family gear pump, a proven, simple design that keeps warehouse and yard forklifts lifting reliably for years. PumpGrid refurbishes these to full flow output, tested before dispatch.

OEM 37B-1KA Series Flow Tested at Rated RPM 3-Month Warranty Pan India Supply

Komatsu's forklift line — FG20, FG25, and the H20 variant, all built around the K21 engine — uses a straightforward external gear pump to power mast lift, tilt, and side-shift functions. It's a simpler system than Komatsu's excavator hydraulics, and that simplicity is exactly why a properly refurbished unit performs as well as new: fewer precision-fit components to wear out of tolerance, and a well-documented rebuild procedure.

Komatsu Forklift Pump — Model by Model

Forklift ModelEnginePump Part FamilyCapacity ClassNew OEM Price*PumpGrid Price*
FG20 / FG20-16K2137B-1KA-30202.0 tonne ₹35,000+Enquire
FG25 / FG25-16K2137B-1KA-50202.5 tonne ₹38,000+Enquire
H20K2137B-1KA-30402.0 tonne ₹35,000+Enquire

*Indicative prices. Actual prices vary by condition, availability and market. WhatsApp for current quote — confirm your exact part number from the pump housing before ordering, as Komatsu revised part numbers across production runs.

Refurbished Komatsu 37B-1KA Series Forklift Gear Pump
Komatsu 37B-1KA gear pump — refurbished with new gear set and shaft seal, flow tested

What Our Refurbishment Covers

Drive & Idler Gear Set

The primary wear component in any gear pump. New gears restore full volumetric efficiency at rated RPM.

Shaft Seal

Always replaced — the single most common external leak point on a Komatsu forklift pump.

Bushings & Housing Wear Faces

Inspected for scoring or wear beyond spec, replaced or reworked as needed.

All O-rings and Gaskets

Renewed on every unit — no carry-forward seals.

Flow Test at Rated RPM

Actual output measured and documented on the written test report before dispatch.

Why Warehouse & Yard Operators Choose PumpGrid

One Down Forklift Slows the Whole Yard

A Komatsu forklift out of service doesn't just affect one loading bay — it backs up receiving, dispatch, and everything scheduled around it. PumpGrid's 2-3 day dispatch keeps that disruption short.

Meaningful Savings on a Simple Component

Because the pump is a straightforward gear design, refurbishment cost stays low — typically 40-60% less than a new OEM unit, without any compromise on flow output.

Fleet Pricing for Multi-Forklift Operations

Warehouses and logistics operators running several Komatsu forklifts get volume pricing and stock reservation on repeat orders.

3-Month Warranty, Confirmed in Writing

If the pump fails due to a refurbishment defect within warranty, we replace it — not repair it.

Komatsu Forklift Pump Warning Signs

Mast lifting slowly or stalling before full height
Whining or grinding sound when lifting
Load drifting down slowly on its own
Oil puddle under the rear of the forklift
Hydraulic fluid running hot during a normal shift
Side-shift or tilt movement sluggish

If 2 or more of the above apply, the gear pump likely needs refurbishment. WhatsApp us the model and symptoms for a quick assessment.

We Supply Across India

FAQs

Does Komatsu make its own forklift pump, or is it sourced like the excavator pumps?
Komatsu's forklift range uses its own gear pump design (the 37B-1KA family) — unlike the excavator line, which runs on Kawasaki axial piston pumps. This is genuine Komatsu-engineered hydraulics, not a third-party sourced component.
Can I identify my exact pump part number without removing it?
Usually yes — the part number is stamped on the pump housing. A clear photo sent over WhatsApp is normally enough for us to confirm the exact match, since Komatsu revised part numbers slightly across production runs of the same FG20/FG25 model.
How long should a refurbished Komatsu forklift pump last?
With clean hydraulic oil and regular filter changes, a properly refurbished gear pump typically runs 4,000-6,000 operating hours under standard warehouse or yard duty — often 2-3 years of regular single-shift use.

Related Pages

Get Komatsu Forklift Pump Quote

Which model do you have? WhatsApp reply within 2 hours.

Your details are private.

Received! WhatsApp reply within 2 hours.
WhatsApp for Fast Quote