Container Handling — Two Generations, Two Different Pumps

Kalmar Reach Stacker Hydraulic Pump

Name: Kalmar Reach Stacker Hydraulic Pump
Brand: Kalmar
Availability: InStock

The main lift and boom-extension circuit on a Kalmar reach stacker runs off a genuinely different pump depending on generation — the "Classic" DRF series (2005-2015) uses a Parker P2 series load-sensing piston pump, while the newer "Gloria" DRG series uses updated hydraulics that vary by region. Getting this wrong causes real problems, not just a poor fit.

DRF (Parker P2) & DRG Coverage Up to 350 bar (DRF) 3-Month Warranty

Sample image — replace with your own product photo

DRF and DRG machines share the same chassis DNA, which makes it easy to assume the pumps are interchangeable — they genuinely aren't. Fitting a DRF pump on a DRG machine (or the reverse) triggers immediate ECU fault codes and hydraulic chatter, because the pump's load-sensing flow-compensator settings are calibrated specifically for each generation's control unit (K-CU on DRF, the newer K-Motion CAN-bus system on DRG).

Kalmar Reach Stacker — Confirmed Pump Reference

Generation	Years	Pump Type	Max Pressure
DRF (Classic)	2005-2015	Parker P2 series, load-sensing	Up to 350 bar
DRG (Gloria)	2015-Present	Updated hydraulics (region dependent)	Confirm from nameplate

Confirm your exact generation from the nameplate or your machine's VIN before ordering — WhatsApp us for a precise match.

What Our Quality Process Covers

Generation Confirmed First

We verify DRF vs DRG from your VIN or nameplate before quoting — these run genuinely different control logic.

Piston & Swashplate Assembly

Measured against original tolerance specification for your confirmed generation.

Load-Sensing Flow Compensator

Tested for correct calibration matched to your machine's control unit — generic settings cause jerky boom movement.

Bench Pressure & Flow Test

Verified at rated pressure, output documented on the written test report.

We Supply Across India

Mumbai Chennai Vishakhapatnam Surat

FAQs — Kalmar Reach Stacker Pump

How do I confirm whether my reach stacker is DRF or DRG?

Check your machine's model designation on the nameplate, or WhatsApp us your VIN and we'll confirm which generation you have before quoting.

My reach stacker's boom movement feels jerky — could that be a pump mismatch?

Genuinely possible — a pump with generic (non-machine-specific) load-sensing settings can cause exactly this symptom. If a pump was recently replaced, confirming it's the correct generation-matched unit is worth checking first.

All Kalmar Pumps Parker Pumps Ports & Logistics Equipment

Kalmar Reach Stacker Hydraulic Pump

Kalmar Reach Stacker — Confirmed Pump Reference

What Our Quality Process Covers

We Supply Across India

FAQs — Kalmar Reach Stacker Pump

Related Pages

Get Reach Stacker Pump Quote